Sintering expert services
Your partner for improving your sintering process
Material data
We help you generate material data for various sintering conditions to help you choose the most suitable material and processing conditions.
Prototype sintering
We offer you prototype sintering capabilities at various conditions to optimise your sintering process and achieve required material performance at lowest total cost.
On-site furnace measurements
We offer furnace measurements at your site to evaluate your sintering conditions and propose means to maximise your sintering efficiency. We can evaluate the following:
- Oxidation
- Carburisation/decarburisation
- Dewaxing conditions
- Leaking
- Sooting/blistering
| Equipment | Capacity | Application |
|
High-temperature |
1360 °C max, 6 °C/s cooling rate, |
Pilot scale high temperature sintering suitable for component prototyping, as well as test specimens. Sinter-hardening capabilities. |
| Belt furnace |
1150 °C max, N2/H2, |
Standard sintering conditions for testing bars and measurement. |
| SMC belt furnace |
800 °C max, air, N2, steam, +/- 3 °C temp stability, 120 kg/h max load |
Heat treatment of all three Somaloy grades (1P, 3P, 5P) |
| Tube furnace |
1200 °C max in vacuum, |
Stainless steel and other alloy sintering at vacuum conditions. |
| Furnace |
1100 °C max, -0.1MPa vacuum, |
Low-temperature sintering and dewaxing process. |
| SinterFlex system |
CO, oxygen and, |
Online measurement of atmosphere quality in dewaxing, sintering, cooling zone and gas inlet. |
Contact us
Sales & Technical support
Personuppgiftspolicy
Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.
Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.